Steam Hot Water PTFE Diaphragm Brass Solenoid Valve 1/4'' to 1'' 24V 110V 220V
This is a solenoid valve for steam, hot water, high temperature gas and liquids, etc, 1/4'' to 1'' female threaded port size, 15mm or 25mm orifice size, 2 way normally closed, diaphragm pilot operated, 0.5 to 10 bar working pressure, standard PTFE+EPDM diaphragm, can be customized as PTFE+FKM diaphragm for higher temperature working media, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc.
Technical Data:
| | | | | | | | | |
| | | | | | | | | 12VDC 24VDC 24VAC 110VAC 220VAC |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
Main Dimension:
Our Production:
FAQ:
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of
applications.
Question 2: How can you tell if your solenoid valve is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out solenoid coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, port size, orifice size, temperature, pressure, voltage, response time and certification required for your application.
Similar Products:
 |  |  |  |
| Max 185℃, 15 bar | Max 300℃, 16 bar | Max 225℃, 25 bar | Max 300℃, 16 bar |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
Steam Hot Water PTFE Diaphragm Brass Solenoid Valve 1/4'' to 1'' 24V 110V 220V Images
|
